Product

Cnsl Resin

CNSL Based Resin mainly consists of two naturally produced Phenolic Compounds i.e. Anacardic Acid and Cardol. Both of them are non-drying and cannot be dried up unless by chemical reaction. CNSL Resin is a transparent viscous resin with golden color film. It is highly suitable for the surface coating application, where outstanding film properties and very high resistance to water and chemicals are required. Therefore, CNSL Resin is used commonly as a paint raw material due to its high water and chemical resistant property

Compatibility : CNSL resin is compatible with all drying oil, alkyd, epoxy, ester gum, phenolic and malic acids in all proportions and only to a limited extent with chlorinated resins, specially chlorinated rubber. They are not compatible with urea resin.

Solubility : CNSL resin is soluble in M.T.O. in all proportions. It is also soluble in most of the common paint solvent like xylene, naptha, ketones, esters etc. It is non soluble in lower alcohols

Due to the presence of the long hydrocarbon chain the condensates are more flexible than the conventional Phenolic Resins. These resins can be used for Surface Coatings with or without oil modification when high chemical resistance is desired.

CNSL Resin condensation products have also been used for other purposes like Dark colour Paints Manufacturing, insulating Varnishes, Moulding Powders, Brake Lining Compositions, etc.

Application

Brake Lining

  • CNSL Formaldehyde (NOVOLAC) resins are used for brake liner binding preparation

Paint and coatings

  • Dark color enamels application
  • Provide required gloss, flexibility as well as good mechanical strength, quick drying ability,
  • Excellent resistance to water, acid, alkali
  • Weather proof, heat and fire resistant
  • An excellent anti corrosive protection
  • Superior properties than those of conventional oils or synthetic resins
  • The coating withstand alkalinity normally encountered with cathodically protected steel hulls

Primers for wood and metal

  • Red oxide metal primer, Zinc chromate primer, other primers
  • Provides Resistance against water, acid, alkali and other chemicals
  • Protects against Corrosion
  • Improves gloss, increases flexibility and as well as hardness

Lacquer

  • Provides toughness and elasticity to the lacquer film
  • To achieve an excellent gloss and superfine adhesive qualities
  • Superior to those of ordinary oil paints in respect to resistance to oils, grease moisture and chemicals

Insulation Varnishes

  • To achieve excellent flexibility and resistance to other chemicals
  • High gloss and adhesion properties
  • High water repelling and low dielectric properties

Laminating industry Resins

  • Improves age hardening and better bonding to the substrate

Foundry core binders

  • Improves collapsibility of the core and enhances bench life and anti-damp behavior in comparison to conventional core binders

Friction resistant material

  • An excellent heat resistant material and as a partial substitute for phenolic resin to reduce cost

Rubber

  • Enhances the resistance of the product to aging, chemical attack and the action of solvents and acids

Polymer based cements

  • For good adhesion and resistance to moisture, acids and alkalis

Adhesives

  • Price advantage over conventional phenolic adhesives admirable properties to meet the growing demand for quality and durability in bonding plywood

Adhesive for wood particle

  • Resole type CNSL formaldehyde resin is used as adhesive in the preparation of composite wood, medium density particle board etc.